Written by Dr. Leo Maren · Co-founder of Fwocus · Behavioural scientist · PhD, Imperial College London
Set the noise limit for the activity, not for the whole day. Group work is supposed to be louder than silent reading. One limit for both will be too strict for one and too loose for the other.
The size of that difference is large. In a survey of 140 London primary classrooms, Shield and Dockrell found about 20 dB between the quietest and the noisiest activities. The number of children in the room also affected the level.
A 20 dB step is a hundredfold change in sound energy. No single line on a meter can fit both ends of that range.
How to set the noise limit
Set the limit from what your class sounds like when the noise is acceptable. Do not guess a number in advance.
Put the device where it will stay, ideally at the front and not next to one table.
Press Start listening during the activity, at a volume you are happy with.
Watch the Level number for a minute. Note where it usually sits.
Move the Noise limit slider a little above that level. The limit is marked on the bar.
The bar is green ("Calm") at lower levels. It turns amber ("Getting louder") at three quarters of your limit. It turns red ("Too loud") when the level stays over the limit.
The scale runs from 0 to 100 and follows decibels at the microphone. A rise of 10 points is about 6 dB. So a jump of 10 points is a clear change in the room, not a small one.
When I first tested the meter at home, the fridge and the laptop fan kept the quiet level well above zero. Every room has a floor like this. That is why the limit is a slider and not a fixed number.
What counts as a too-loud moment
A too-loud moment is counted when the level stays over the limit for about 0.7 seconds. A dropped book or one burst of laughter usually does not count. A class that stays loud does.
We added the delay after early tests. Without it, every closed door counted, and the number meant nothing. With it, the count follows the times the room really got loud.
The count goes up once per loud period. The room has to drop clearly below the limit before a new moment can count. Press Reset, or R, to set the count to zero.
The count gives the class a goal it can see. For example: fewer than three too-loud moments during this work block. Reset the count at the start of each block, so one loud lesson does not carry into the next.
Does a noise meter make a class quieter?
A little, in the one classroom study I found that measured it, and mostly at the loud end. A 2015 study by van Tonder and colleagues used a light-based meter in three Grade 1 to 3 classrooms in South Africa.
Each class had about 35 to 40 learners. After 6 days without feedback, the classes had 6 days with the meter visible.
Average noise fell by 1.4 dBA, from 68 to 66.6 dBA. The share of time above 70 dBA fell from 32.8% to 24.3%. The six teachers who answered a questionnaire felt the meter helped behavior.
What this shows: visible feedback cut the loudest periods more than the average level. What it does not show: a long-term effect. The study lasted one semester, in two schools.
A meter works better when children know what the right voice sounds like. In a 2023 preschool study by Sarfaty and Ben-Eliyahu, one class had an 8-week program of songs, games, and talks about voice volume. Compared with a second class, the children made modest but significant gains in voice control and self-regulation.
I am a behavioural scientist, not a teacher. From that side, one point matters most: feedback works best when it is immediate and linked to a goal children can reach. Show the bar, practice a "partner voice" together, and then let the meter do the reminding.
The sound stays in your browser
The meter measures loudness only. Nothing is recorded, saved, or sent, and the sound is processed in the browser on your device.
Privacy was the first requirement I wrote down for this tool. A classroom is full of children's voices. The meter needs one number from each moment of sound, so it keeps that number and nothing else.
Press Stop listening to turn the microphone off. Most browsers also show a microphone icon while a page is listening. Your school's device rules still apply, so check them before you use any microphone tool in class.
What this meter cannot tell you
The Level is a relative number for comparing moments in one room. It is not a calibrated decibel reading.
Do not compare devices or rooms. Microphones differ, so the same noise can read differently on another laptop.
Do not use it for hearing safety or acoustic checks. Those need a calibrated sound level meter.
It cannot tell who is loud. A device next to one noisy table will mostly measure that table.
Within those limits, the meter answers the question a teacher usually has: is the room louder now than it should be for this activity?
To give a noisy task a clear end, open the visual timer in another window. The children can see both the time left and the noise level.
FAQ
Does the noise meter make a sound when the class is too loud?
No. It plays no alarm. The bar turns red, the label changes to "Too loud", and the too-loud count goes up.
Why does the bar go down slowly?
The bar rises fast and falls slowly. Short peaks stay visible for a moment, and the bar does not flicker with every sound.
What if the browser blocks the microphone?
Allow microphone access in the address bar, then press Start listening again. If no microphone is found, connect one or use a device with a built-in microphone.
Which keys can I use?
Space starts and stops listening. R resets the too-loud count. F switches fullscreen on and off, which helps on a projector.