Zen Paper · Fullscreen Clock
--:--

Scroll for guide & context

Fullscreen Clock

Test the clock from the farthest seat, not from the laptop. A clock that looks huge from the front can be hard to read at the back of a room. The person who sets up the clock is almost always the closest viewer.

I learned this in a workshop room. I projected a clock, checked it from the lectern, and started. At the break, a participant in the last row told me she had read the time from her phone all morning.

How big the digits need to be at a distance

A useful guide comes from sign design. The 2010 ADA Standards set a minimum text height for signs mounted 40 to 70 inches above the floor. The minimum is 5/8 inch up to 6 feet away. Add 1/8 inch for each foot beyond 6 feet.

  • At 10 feet: about 1.1 inches (2.9 cm).
  • At 20 feet: about 2.4 inches (6 cm).
  • At 30 feet: about 3.6 inches (9.2 cm).

These numbers are minimums for signs, measured on a capital letter I. A clock across a room is read at a glance, often by people with glasses or poor eyesight. Treat the numbers as a lower limit and go bigger when you can.

To check your setup, hold a ruler against the screen and measure one digit. Then compare it with the distance to the farthest seat.

Make the digits bigger

In fullscreen, the digits grow with the width of the screen, up to a fixed limit. On a large display, browser zoom makes them bigger: press Ctrl and + (Command and + on a Mac). Increase the zoom until the digits stop growing.

Hiding the seconds with the S key does not make the digits bigger. It removes the two digits that change every second, so there is less to read from far away.

The date line under the clock is much smaller than the time. From the back of a room, expect people to read only the time.

Keep the clock in fullscreen so the screen stays on

In fullscreen, this page keeps the screen awake on supported browsers. When you leave fullscreen, your computer's normal sleep settings apply again. On a laptop connected to a TV or projector, the display can then turn off after a few minutes without input.

Before we added this, it happened in my workshop: the projector showed "No signal" in the middle of a session. Now I keep the clock in fullscreen for the whole session.

If the screen still turns off, your browser does not support this feature, so change the sleep setting. On Windows 11, look under System, then Power, for the screen and sleep times. On macOS, look under Lock Screen for the setting that turns the display off. On a tablet, set a longer auto-lock or screen timeout.

Use a fullscreen clock on a TV

A TV is the cheapest large display in most homes and offices. Connect a computer with HDMI and press F. Some smart TV browsers can open the page too, but a laptop is more reliable for fullscreen and keyboard shortcuts.

On an OLED TV, be careful with any image that stays on screen for hours. LG's support guide warns that static logos left on screen for a long time can cause burn-in. It also describes the Pixel Refresher and logo brightness settings on its TVs.

A clock page is mostly static: the background, the colon, and the date stay in place all day. On an OLED TV, lower the brightness and turn the clock off when nobody needs it. LCD screens are much less affected.

Projectors need a darker room

A projector cannot project black. It can only add light, so light from the room washes out the dark digits. Close the blinds near the screen, or switch off the lights closest to it.

Then check the clock from the back row again. I do this after every change to the lights, because the difference is larger than it looks from the front.

A clock shows the time. Some rooms need the time left.

A fullscreen clock suits rooms where people plan around the time of day: an office, a kitchen, a lab, or a waiting area. In an exam or a timed talk, people want to know how much time is left, not what time it is.

For those rooms, use a countdown. The exam timer counts down a test section, and the visual timer shows a shrinking disc for classrooms. For a talk, use the presentation stopwatch.

In timed sessions, I use both. The countdown goes on the projector for the room. The clock stays on my laptop, so I know when the room booking ends.

FAQ

How do I leave fullscreen?

Press Esc or F, or use the fullscreen button again.

Is the fullscreen clock accurate?

It shows the time from your device's system clock. Turn on automatic time in your device settings so that the clock stays in sync.

Can I show a different time zone?

No. The clock always shows the local time of the device that opens the page.

Is the fullscreen clock free?

Yes. It is free, with no account and no installation.