Zen Paper · 40 Second Timer
🏋️ One 40-second work interval
00:40

Scroll for guide & context

40 Second Timer

Most people who search for a 40 second timer want one work interval of a circuit. The usual format is 40 seconds of work and 20 seconds of rest, often written as 40/20. This page times the 40 seconds. The sections below show how to get the 20 seconds of rest without a second timer, and when 40/20 is the wrong choice.

40/20 is a 2:1 ratio, and that is the upper limit

A work-to-rest ratio compares the length of the effort with the length of the recovery. Forty seconds of work and twenty seconds of rest give a ratio of 2:1. You work twice as long as you rest.

For high-intensity training, the US Human Performance Resource Center (HPRC) recommends a ratio of 1:1, with 2:1 as the maximum. It warns that ratios much higher than 2:1 become extreme conditioning. So 40/20 is not a moderate format. It sits at the edge of the recommended range.

This changes how you should choose your exercises. At 2:1, you do not fully recover in 20 seconds. Fatigue adds up from round to round. If every station is a hard, full-body movement, round five is usually much worse than round one.

When I first did 40/20 circuits in my flat during my PhD, I made exactly this mistake. I put burpees, jump squats and mountain climbers back to back. By the third round, my "work" was mostly standing with my hands on my knees. The timer said 40 seconds of work. My legs did perhaps 20.

Choose between 40/20 and 30/30

If your form or your pace falls apart in the second half of each interval, a 1:1 ratio is often the better choice. A 30/30 format keeps the same one-minute round but doubles the rest.

A 2021 study by García-De Frutos and colleagues compared three 10-minute cycling sessions at a 1:1 ratio: 30/30, 60/60 and 90/90. The 22 participants were trained young men. Heart rate and blood lactate were similar in all three sessions. But the 30/30 session kept a higher mean power output. Shorter intervals let the riders work harder in each effort.

The study did not test 40/20, and it did not test circuits of bodyweight exercises. What it suggests is useful anyway. Interval length and rest length change how hard each effort can be, not only how tired you feel.

My practical rule is simple:

  • Use 40/20 when you want conditioning and you can hold good form for all 40 seconds. Mix easy and hard stations.
  • Use 30/30 when the exercises are hard, when you are new to intervals, or when quality of movement is the goal. The 30 second timer covers each half.
  • Use a longer rest when you lift heavy weights in the circuit. Strength work needs more recovery than 20 seconds. The 90 second timer fits rest between strength sets.

How to run a 40/20 circuit with one countdown

This timer has no interval beeps. It counts one length down and then stops. You can still run an exact 40/20 circuit with one key press per round.

  1. Press + four times before you start. Each press adds 5 seconds, so the timer shows 1:00.
  2. Press Start. Work until the display shows 0:20.
  3. Rest and move to the next station until the chime sounds.
  4. Press Space. The timer restarts from 1:00 for the next round.

This method uses the full minute as one round. You watch for 0:20 as the change point, and the chime marks the start of the next round. Press R to go back to 1:00 at any time.

If you prefer to time only the work, keep 0:40. At the chime, move to the next station and press Space when you are in position. Your rest will be however long the move takes. I tested this for a few weeks. My "20 seconds" of rest was sometimes 12 seconds and sometimes 35, because the transition time changed with each station. The 1:00 method is more honest.

For a longer structure with a fixed number of rounds, the interval stopwatch records each lap. For one full minute per round without the 0:20 check, the 1 minute timer works the same way.

Set up the stations before the first round

In a 40/20 circuit, the 20 seconds of rest is also your transition time. If you need to find a kettlebell or move a mat, you lose most of the rest.

Put every station in order, in a small circle, before you press Start. Put the laptop or phone where you can see the digits from each station. Press F for fullscreen so the numbers are large.

I also write the station list in the task line above the timer, for example "Squat, push-up, row, plank, lunge". The line is not saved, but it stays on the screen during the session. It removes one small decision from every round.

Alternate hard and easy stations

Because you do not recover fully at 2:1, the order of the stations matters. Put a lower-body exercise after an upper-body exercise. Put a core exercise after a high-impact one. This lets one muscle group rest while another works.

A sequence I use:

  1. Goblet squat
  2. Push-up
  3. Jumping jacks
  4. Bent-over row
  5. Plank
  6. Reverse lunge

Six stations at one minute each make a six-minute round. Two or three rounds, with one or two minutes of easy walking between them, make a complete short session.

If you are new to exercise, have a heart condition, or have been told to limit hard effort, talk to a doctor first. Start with 30/30 or 20/40 and increase the work time over several weeks.

Other uses for 40 seconds

The 40-second countdown also fits a few non-workout jobs:

  • Speaking drills. Forty seconds is long enough for one clear point with one example. It is a good step between a 30-second answer and a full minute.
  • Game turns. Many party games and classroom games use 30 or 45 seconds per turn. Forty seconds is a fair middle when players are younger.
  • Holding positions. A 40-second hold works for a side plank or a wall sit. For longer holds with a record to beat, the plank timer is a better fit.

Timer controls

Press Space to start, pause and resume. Press R to reset to the length you set. Press F for fullscreen. The Up and Down arrow keys, and the + and − buttons, change the length by 5 seconds. They work before and during a session.

At zero, the default sound is one soft singing-bowl chime. The browser tab shows the time left while the timer runs. Sound follows your device volume, and some phones mute web audio in silent mode. In a loud gym, turn the volume up or keep the screen in view. The Fwocus app adds ambient sounds, focus stats and streaks.

FAQ

Is 40 seconds on and 20 seconds off the same as Tabata?

No. The original Tabata protocol uses 20 seconds of very hard work and 10 seconds of rest, for eight rounds, which is four minutes in total. Both are 2:1 ratios, but 40/20 uses longer efforts at a lower intensity. The 4 minute timer explains the original Tabata study.

How many rounds of 40/20 should I do?

There is no fixed number, and I know of no study that sets one for 40/20 circuits. I start with 12 rounds, which is 12 minutes, and add rounds only when my form stays good in the last round. The number of rounds matters less than the quality of each 40-second interval.

Can I make this timer beep every 20 seconds?

No. This timer counts one length and plays one chime at zero. For an exact 40/20 round, set it to 1:00 with the + button, work until 0:20, and rest until the chime.